Product Detail | RCS Communications

Features
Specifications
Documents
Accessories

RF output power 2W both on VHF/UHF
Large 7-Color LED indicator on the top panel
Selective Power-on LED
Selective Call Alert LED
Battery Level Indication
Multi-status function indication
Renowned KENWOOD Audio Quality: TX/RX audio profile with optimizable digital processor
Audio Equalizer: Flat, High, Low
Auto Gain Control: On, High, Low, Off
Noise Suppressor
Microphone type settings
Multiple Scan Functions; Dual Priority, Single Priority, Single Zone, Multi, Normal Scan
VOX & PTT –triggered Semi- VOX, Voice-operated TX
Emergency Function: Customizable Emergency Profile
Lone Worker
Max / Min Volume setting & Volume control
Voice Announcement
Remote Stun / Kill / Check
Electronic Serial Number (ESN)
MIL-STD-810 C/D/E/F/G
IP54 and IP55
Multi-protocol digital radio: Designed to operate under NXDN or DMR digital and FM analog protocols (Optional License required)

Analog – FM
- FM Conventional Operation
- FleetSync: PTT ID, Stun/Revive,Talk back, Selcall
- MDC1200: PTT ID, Radio Inhibit/Uninhibit, Radio check, Emergency
  QT / DQT, DTMF, 2-tone
- Built-in Programmable Voice Inversion
- Scrambler (per channel)
- Built-in Compander (per channel)
Digital – DMR Mode (Optional License required)
- RF output power 2W both on VHF/UHF
- Large 7-Color LED indicator on the top panel
- Selective Power-on LED
- Selective Call Alert LED
- Battery Level Indication
- Multi-status function indication
- Renowned KENWOOD Audio Quality: TX/RX audio profile with optimizable
  digital processor
- Audio Equalizer: Flat, High, Low
- Auto Gain Control: On, High, Low, Off
- Noise Suppressor
- Microphone type settings
- Multiple Scan Functions; Dual Priority, Single Priority, Single Zone, Multi,
  Normal Scan
- VOX & PTT –triggered Semi- VOX, Voice-operated TX
- Emergency Function: Customizable Emergency Profile
- Lone Worker
- Max / Min Volume setting & Volume control
- Voice Announcement
- Remote Stun / Kill / Check
- Electronic Serial Number (ESN)
- MIL-STD-810 C/D/E/F/G
- IP54 and IP55
- Multi-protocol digital radio: Designed to operate under NXDN or DMR digital and FM
  analog protocols (Optional License required)
Digital – NXDN® Mode (Optional License required)
- FDMA – Very narrow 6.25 kHz & narrow 12.5 kHz bandwidths
- NXDN Conventional Operation
  Site Roaming
- Digital / Analog Mixed mode
- Group / Individual Call
- Status / Short data, Paging Call
- Remote Stun / Kill, Monitor, Check & Control
- Digital Bit Scrambler
- Late Entry
- Over-the-Air Alias (OAA)

General		NX-1202AV	NX-1303AU
Pre-set Frequencies	Type 1	136-174 MHz	450-520 MHz
Max. Channels per Radio		64
Number of Zones		4
Max. Channels per Zone		16
Channel Spacing	Analog	301 / 251 / 15 / 12.5 kHz
Channel Spacing	Digital	12.5 / 6.25 kHz
Power Supply		7.5 VDC ±20 %
Battery Life		DMR	Analog/NXDN
KNB-45L (2000mAh)		Approx. 18 hours	Approx. 15 hours
KNB-69L (2550mAh)		Approx. 23.5 hours	Approx. 19.5 hours
Operating Temperature(Radio only)*2		-22°F to +140°F (-30°C to +60°C)
Frequency Stability (-30 to +60°C; +25°C Ref.)		±0.5 ppm
Antenna Impedance		50 Ω
Dimensions		(W x H x D) Projections Not Included
Radio with KNB-45L		2.13 x 4.84 x 1.32 in (54 x 123 x 33.5 mm)
Radio with KNB-69L		2.13 x 4.84 x 1.48 in (54 x 123 x 37.5 mm)
Weight		(Basic model)	(Standard keypad model)
Radio Only		5.64 oz (160 g)
Radio with KNB-45L		9.88 oz (280 g)
Radio with KNB-69L		10.41 oz (295 g)
FCC ID	Type 1	K44501000	K44501101
IC Certification		282F-501000	282F-501100
Receiver		NX-1202AV	NX-1302AU
Sensitivity	NXDN® @ 6.25 kHz Digital (3% BER)	0.18 μV
	NXDN® @ 12.5 kHz Digital (3% BER)	0.22 µV
	DMR® @ 12.5 kHz Digital (1% BER)	0.25 µV
	DMR® @ 12.5 kHz Digital (5% BER)	0.18 µV
	Analog @ 12.5/25 kHz (12 dB SINAD)	0.20 μV / 0.24 μV
Selectivity	Analog @ 12.5 / 25 kHz	68 dB / 74 dB
Intermodulation Distortion		70 dB
Spurious Rejection		70 dB
Audio Distortion		7%
Audio Output Power		1 W / 12 Ω (Internal Output)
Transmitter		NX-1202AV	NX-1302AU
RF Power Output	(High / Low)	2W / 1W
Spurious Emission		-70 dB
FM Hum & Noise	Analog @ 12.5 / 25 kHz	40 dB / 45 dB
Audio Distortion		2%
DMR Digital Protocol		ETSI TS 102 361-1, -2, -3
Emission Designator		16K0F3E, 11K0F3E, 8K30F1E, 8K30F1D, 8K30F7W, 4K00F1E, 4K00F1D, 4K00F7W, 4K00F2D, 7K60FXD, 7K60FXE

*1 25 / 30 kHz in VHF/UHF Bands excluding T-Band are not included in the models sold in the USA or US territories.
*2 Operating temperature specification for a Li-ion battery is -10°C to +60°C [14°F to +140°F].Analog measurements made per TIA603. Specifications are measured according to applicable standards.Specifications are subject change without notice, due to advancements in technology.

FleetSync® is a registered trademark of JVCKENWOOD Corporation in the United States and/or other countries.NXDN® is a trademark of JVCKENWOOD Corporation and Icom Inc.NEXEDGE® is a registered trademark of JVCKENWOOD Corporation.All other trademarks are the property of their respective holders.

MIL-STD & IP

MIL Standard	MIL 810C Methods/Procedures	MIL 810D Methods/Procedures	MIL 810E Methods/Procedures	MIL 810F Methods/Procedures	MIL 810G Methods/Procedures
Low Pressure	500.1/Procedure I	500.2/Procedure I, II	500.3/Procedure I, II	500.4/Procedure I, II	500.5/Procedure I, II
High Temperature	501.1/Procedure I, II	501.2/Procedure I, II	501.3/Procedure I, II	501.4/Procedure I, II	501.5/Procedure I, II
Low Temperature	502.1/Procedure I	502.2/Procedure I, II	502.3/Procedure I, II	502.4/Procedure I, II	502.5/Procedure I, II
Temperature Shock	503.1/Procedure I	503.2/Procedure I	503.3/Procedure I	503.4/Procedure I, II	503.5/Procedure I
Solar Radiation	505.1/Procedure	505.2/Procedure I	505.3/Procedure I	505.4/Procedure I	505.5/Procedure I
Rain*	506.1/Procedure I, II	506.2/Procedure I, II	506.3/Procedure I, II	506.4/Procedure I, III	506.5/Procedure I, III
Humidity	507.1/Procedure I, II	507.2/Procedure II, III	507.3/Procedure II, III	507.4	507.5/Prcedure II
Salt Fog	509.1/Procedure I	509.2/Procedure I	509.3/Procedure I	509.4	509.5
Dust	510.1/Procedure I	510.2/Procedure I	510.3/Procedure I	510.4/Procedure I, III	510.5/Procedure I
Vibration	514.2/Procedure VIII, X	514.3/Procedure I	514.4/Procedure I	514.5/Procedure I	514.6/Procedure I
Shock	516.2/Procedure I, II, V	516.3/Procedure I, IV	516.4/Procedure I, IV	516.5/Procedure I, IV	516.6/Procedure I, IV
International Protection Standard
Dust & Water Protection*		IP54/55*		To meet IP54/55, the 2-pin connector cover has to be connected on the radio or the locking bracket has to be attached to the external speaker microphone.